21
English
Menu
Item
initial Value
Description
Service
CAS
Pro:idiom
Configures CAS support. Applies to only the NB673, NB677, and NB678 models.
OFF : Turns off CAS support.
LYNK DRM : Select to turn on S-LYNK DRM CAS support only.
Pro:idiom : Select to turn on Pro:Idim CAS support only.
LYNK DRM,PI : Select to have the TV support S-LYNK DRM CAS and Pro:Idiom CAS.
Self Diagnosis
Enter Self Diagnosis Menu.
y
Picture Test: Use to check for picture problems. If the problem appears in the test
picture, select YES, and then follow the directions on the screen.
y
Sound Test: Use the built-in melody to check for sound problems. If the problem
occurs during the test, select YES, and then follow the directions on the screen.
PI AES Data
0xD279
Displays the current state of Pro:Idion AES
Self Diagnosis
for TV
Lets you check the state of the TV picture and sound.
y
Picture Test : Use to check for picture problems. If the problem appears in the test
picture, select YES, and then follow the directions on the screen.
y
Sound Test : Use to check for sound problems. If the problem occurs during the test,
select YES, and then follow the directions on the screen.
Self Diagnosis
for HTV
Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB. If you have
any problems with the Pro:idiom encryption channel or the communications with the SI STB or
SBB, use this diagnosis function. If Pro:Idiom DTV Channel Key Loss appears to have failed and
the Pro:Idim encryption channel has failed to play content, first check the broadcasting systems
related to Pro:Idiom encryption. If your broadcasting system does not have a problem, contact
Samsung Service. If STB SI Vendor Setting appears to have failed and communication with the
SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB does not have a
problem, contact to Samsung Service.
Upgrade Now
Lets you upgrade the TV SW with a USB memory stick. See Page 31.
Service
Pattern
32GRAY
Lets you check the state of the TV picture by displaying picture test patterns. Press the Menu
button to turn off the test patterns and exit.
ATV Cable
AGC Gain
Default
Lets you control the AGC gain of the analog cable channels. Don't change the default value
unless problems occur.
DTV Cable
AGC Gain
Default
Lets you control the AGC gain of the digital cable channels. Don't change the default value unless
problems occur.
TV reset
Returns all settings on the TV to their factory defaults.
✎
REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets you
deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER contents
through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only in stand-
alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the REACH server
product for more operating information.
[HG670677-ZA]Install Guide-ENG.indd 21
2013-02-25 �� 2:19:25
