29
1. After you enter a phone number, the
screen prompts you to enter a name.
Press the key marked with the
desired letter. Since each key has
three or more letters, press the key
repeatedly until the desired letter
displays on the screen.
Example: For the letter
L
, press the
5
key three times.
To enter the same letter consecutively
or two different letters on the same
key, use the key as a separator.
Example: To enter the name Ann,
press
2
for A,
6
for N as a
separator, and
6
again for the second
N.
Repeat these steps as necessary to
enter the entire name.
Note:
The phone displays the first
letter in upper case and all
subsequent letters in lower case. If
you insert a space, the next letter
will be upper case. To insert a
space, press . To change from
lower to upper case letters, press
the
π
or
†
keys located on the left
side of the phone. To insert a
special character, press
1
repeatedly
until the desired character displays
on the screen.
2. Press
OK
to save the name.
28
Entering Names in Memory
The phone can store a name of up to 12 letters in
memory with each phone number.
Phone Bo
ok
Phone Bo
ok
Correcting a Name or Number
If you make a mistake while entering a name or
number, you can correct it as follows:
1. To correct a letter or digit:
◆
Press
CLR
once or more until the
incorrect letter or digit is cleared.
◆
Continue entering the name or
number.
◆
You can also use the
or
keys to move to a specific letter to
correct or change it.
2. To clear the entire name or number,
press
CLR
for more than one second.
