EN
6
Installing Your Microwave Oven
Place the oven on a flat level surface 85cm above the floor. The
surface should be strong enough to safety bear the weight of the oven.
If the supply cord is damaged, it must be replaced by a special
cord or assembly available from the manufacturer or its service
agent.
For your personal safety, plug the cable into a 3-pin, 230 Volt,
50Hz, AC earthed socket. If the power cable of this appliance is
damaged, it must be replaced by a special cable.
Do not install the microwave oven in hot or damp surroundings
like next to a traditional oven or radiator. The power supply
specifications of the oven must be respected and any extension
cable used must be of the same standard as the power cable
supplied with the oven. Wipe the interior and the door seal with a
damp cloth before using your microwave oven for the first time.
Setting the Time
Your microwave oven has an inbuilt clock. The time can be displayed
in either the 24-hour or 12-hour notation. You must set the clock:
•
When you first install your microwave oven
•
After a power failure
Do not forget to reset the clock when you switch to and from summer or
winter time.
1.
When you install your oven, make sure there is adequate
ventilation for your oven by leaving at least 10 cm (4
inches) of space behind and, on the sides of the oven
and 20 cm (8 inches) of space above.
2.
Remove all packing materials inside the oven.
Install the roller ring and turntable.
Check that the turntable rotates freely.
3.
This microwave oven has to be positioned so that plug is
accessible.
20cm
above
10cm
behind
10cm on
the side
85cm of
the floor
1.
To display the
Then press the
time in the..
button(
)..
24-hour notation
Once
12-hour notation
Twice
2.
Turn the
TIME/WEIGHT
(
) dial to set hour.
3.
Press the
button.
4.
Turn the
TIME/WEIGHT
(
) dial to set minute.
5.
Press the
button.
nl_YwlslTWZZ`YiluUGGwG]GG{ SGq GX\SGYWW_GG\aZ`Gwt
