Applications 202
Initial Configuration
1.
Sign into your Samsung account.
2.
From the Home screen, tap
➔
WatchON
.
Note:
If you are not connected to an active Wi-Fi, you may be
prompted to continue the set up process via a mobile
network. Click
Connect
to proceed.
3.
Select your desired country for your TV Guide’s source
listing and tap
Next
.
4.
Enter your current zip code and tap
Done
. This zip code
must correspond to the location of your desired TV and
set top box.
5.
From the
Find your TV service
screen, select a service
provider from the available channel listing.
6.
From the
Choose your TV Brand
screen, tap your TV’s
manufacturer name.
•
If you have a brand of TV not listed or you are using a projector,
select from one of the following two options. Choose from
either
Other TV Brands
or
I Have a Projector
.
7.
Aim your device at the TV and tap
(
Power
) to
confirm the set up process completed successfully and
the correct TV IR codes were selected.
Note:
The process of the initial TV activation can take up to 10
seconds. Please do not press the button again.
8.
If the TV turned on, tap
Yes
.
– or –
If the TV did not turn on after tapping
(
Power
) and
waiting 10 seconds, tap
No
or
Retry
.
9.
From the
Choose Your TV Tuner
screen, select the entry
that corresponds to your current channel control
method:
• Cable/Satellite/STB/PVR/DVR
: selected when changing
channels is done via a receiver box. Channels are not changed
via the TV remote but rather through the receiver/box.
• My xxx TV
: selected when a signal is fed directly into the TV
and no box is used. Channels are changed directly on the TV by
using the TV remote and not a box’s remote.
Note:
Try matching your current channel selection method.
DRAFT
For Internal Use Only