Installation
Installation
English
32
NOTE
To position using the pipe connector
You washer comes with a pipe connector
that is designed to join the upper drain
hose and the lower drain hose. You can
choose to use the connector to combine
two drain hoses into a single outlet.
1.
Insert the clamp ring on the end of the
drain hose, one for each drain hose.
A
2.
Insert the pipe connector into the drain
hoses. Make sure the longer side
(A)
fits
into the drain hose running from the
lower washer.
3.
Fix the position of the clamp rings near
the end of each hose.
• To remove the pipe connector, follow
these steps above in the reverse order.
STEP 6
Final check and power on
• Before using your washer, make sure to remove the dehumidifying agent (silica gel)
from inside the upper washer.
• Do not eat or swallow the dehumidifying agent (silica gel).
• The protective cover may form moisture on its surface after the washer has checked
for a leak to ensure normal operation. This is normal, and does not indicate a defective
part. Open the cover for a moment to remove the moisture.
• Plug the power cord into an AC 220-240 V / 50 Hz approved electrical outlet protected
by a fuse or circuit breaker. Then, press
POWER
to turn on the washer.
FlexWash(COMBO)_03768N_India_EN.indd 32
5/12/2017 5:53:29 PM
Содержание FlexWash WR24M9960K Series
Страница 1: ...FlexWash User manual WR24M9960K FlexWash COMBO _03768N_India_EN indd 1 5 12 2017 5 53 18 PM ...
Страница 81: ...Memo English 81 FlexWash COMBO _03768N_India_EN indd 81 5 12 2017 5 53 45 PM ...
Страница 82: ...Memo English 82 FlexWash COMBO _03768N_India_EN indd 82 5 12 2017 5 53 45 PM ...
Страница 83: ...Memo English 83 FlexWash COMBO _03768N_India_EN indd 83 5 12 2017 5 53 45 PM ...