2
_ Before you begin
before you begin
About this mAnuAl
READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY.
Important note to the installer
• Read all instructions contained in these installation instructions before installing range.
• Remove all packing materials from the oven compartments before connecting the electrical supply
to the range.
• Observe all governing codes and ordinances.
• Be sure to leave these instructions with the consumer.
Important note to the consumer
Keep these instructions for the local electrical inspector’s use.
• As when using any appliance generating heat, there are certain safety precautions you should follow.
• Be sure your range is installed and grounded properly by a qualified installer or service technician.
• Make sure the wall coverings around the range can withstand the heat generated by the range.
• To eliminate the need to reach over the surface elements, cabinet storage space above the elements
should be avoided.
• The range should not be placed on a base.
FoR YouR sAFEtY
WARNING
WARNING
If the information in this manual is not followed exactly, a fire or electrical
shock may result causing property damage, personal injury or death.
WARNING
WARNING
Before beginning the installation, switch power off at the service panel and
lock the service disconnecting means to prevent power from being switched on accidentally. When the
service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a
tag, to the service panel.
WARNING
WARNING
This appliance must be properly grounded.
Anti-tiP DEViCE
TO REDUCE THE RISK OF TIPPING, THE APPLIANCE MUST BE SECURED BY PROPERLY
INSTALLING THE ANTI-TIP BRACKET PROVIDED WITH THIS APPLIANCE.
WARNING
WARNING
•
ALL RANGES CAN TIP
•
INJURY TO PERSONS COULD RESULT
•
INSTALL ANTI-TIP BRACKET PACKED WITH RANGE
•
SEE INSTALLATION MANUAL
If you pull the range out and away from the wall for any reason, make sure the Anti-Tip bracket is
engaged when the range is pushed back against the wall.
Installation-USA DG68-00108E-01_EN.indd 2
2011-03-18 �� 4:06:26
