Troubleshooting
Problems and solutions
The washing machine will not start
• Make sure the door is firmly closed.
• Make sure the washing machine is plugged in.
• Make sure the water source faucet is turned on.
• Make sure to press the Start/Pause button.
No water or insufficient water supply
• Make sure the water source faucet is turned on.
• Make sure the water source hose is not frozen.
• Make sure the water intake hose is not bent.
• Make sure the filter on the water intake hose is not clogged.
Detergent remains in the detergent drawer after the wash program is complete
• Make sure the washing machine is running with sufficient water pressure.
• Put the detergents in the inner parts of the detergent drawer(away from the outside edges).
Washing machine vibrates or is too noisy
• Make sure the washing machine is set on a level surface. If the surface is not level, adjust the washing
machine feet to level the appliance.
• Make sure that the shipping bolts are removed.
• Make sure the washing machine is not touching any other object.
• Make sure the laundry load is balanced.
The washing machine does not drain and/or spin
• Make sure the drain hose is not squashed or bent.
• Make sure the water hose mesh filter is not clogged.
Understanding error messages
Before contacting After-Sales service:
1.
Try to remedy the problem (See "Troubleshooting" on this page).
2.
Restart the programme to see if the fault is repeated.
3.
If the malfunction persists, call after-sales service and describe the problem.
9
Error displayed
Solution
•
Close the door.
•
Make sure the source water faucet is turned on.
•
Check the water pressure.
•
Clean the debris filter.
•
Make sure the drainage hose is installed correctly.
•
Laundry load is unbalanced; loosen any tangled laundry.
•
If only one item of clothing needs washing, such as a bathrobe or jeans, the
final spin result might be unsatisfactory and an "UE" error message will be
shown in the display window.
•
Check the end of the drain hose is too low. (Make sure the holder of drain
hose in the back is intact)
•
Check the end of the drain hose is submerged in water.
All manuals and user guides at all-guides.com
