8
Overview of the control panel
F611
1. Detergent dispenser
2. Display panel
Displays the remaining wash cycle time and error messages.
3. Program button
Press the button to select one of the eight available wash
programs.
4. Option button
Press the button repeatedly to cycle through the available partial
wash options
{Rinse
+
→
Prewash
→
(Rinse
+
+ Prewash)
→
Cancel
→
Rinse
+
}.
Note : Prewash is available only with Cotton, Coloureds, Synthetic
or Delicate programs.
5. Spin selection button
Press the button repeatedly to cycle through the available spin
speed options.
6. Temperature selection button
Press the button repeatedly to cycle through the available water
temperature options (cold water, 30˚C, 40˚C, 60˚C and 95˚C).
When pressing this button during washing, you can see the
selected temperature in the display panel.
7. Start/Pause button
Press to pause and restart programs.
8.
(On/Off) button
Press once to turn the washing machine on, press again to turn the
washing machine off. If the washing machine power is left on for
longer than 10 minutes without any buttons being touched, the
power automatically turns off.
WM stops the current step of the cycle or does not proceed to
the next step of washing (indication of remain time on LED
display may increase).
Your new washing machine is equipped with Fuzzy Logic system,
which not only sets the optimum level of water and other parameters
of washing, but also controls the washing process as well as makes
necessary corrections in order to provide better washing results.
In the above- mentioned matter, the Fuzzy Logic system has detected
deviations in washing cycle such as: high quantity of detergent at the
end of the cycle, high vibration level while spinning, etc.
After detection of such abnormalities, the washing machine is
suspending the normal course of program in order to normalize these
parameters and continue the cycle.
Fuzzy logic system makes 7 attempts to eliminate such deviations.
If it is impossible to normalize the above mentioned deviations by
Fuzzy Logic system, you will see the corresponding indication on LED
display (see chapter “Elimination of Problems”) The operation of
Washing machine that corresponds to above- mentioned scheme is
considered to be normal.
Washing a Load of Laundry
8
Cotton, Coloureds, Synthetic, Delicate, Wool, Quick, Rinse+Spin,
Spin
No spin
→
Rinse hold
→
Cancel
→
No spin
