Samsung ER-4915, Руководство по программированию

Страница: 5 / 36

ER-4915 Dealer Pocket Programming Guide
ER-4915 Dealer Pocket Programming Guide
32 5
VOID
S
OFF
REG
X
Z
P
NOTE: The ER-4915 may be initialized (Initial
Cleared) at any time. The Initial Clear proce-
dure may be used to clear keyboard lock-ups
and constant error conditions. An Initial Clear
will not affect register programming or clear
previously stored totals from memory. How-
ever, an Initial Clear
will cause balancing
discrepancies if performed in the middle of a
transaction.
The Service mode (S-Mode) position is at “6 o’clock” on the
keylock. It is not labeled, and can be accessed only by the “C” key.
See the above illustration.
S-Mode Set-Up Program Scans
Since much time and energy has been invested in the planning and
programming of your SAMSUNG ER-4915, it is advisable to print a hard
copy of the final program for future reference. This copy should be kept
in a safe place.
Keylock in Programming position:
Tax Program Scan
Depress the CASH TEND key, then the TAX 1 SHIFT key for Tax 1
read-out; or depress the CASH TEND key, then the TAX 2 SHIFT key
for Tax 2 read-out.
The read-out will be the same as receipt during programming.
Self Tests Key Sequence
Function Keylock Position
Initialize P-Mode
Power up machine while holding down the
"SUBTOTAL" key.
Memory All Clear
"C" key to the
S-Mode position Power up machine while holding down the "00"
key.
Reset All Totals
& Counters
"C" key to the
S-Mode position Power up machine while holding down the
"CHECK" key.
Reset Grand
Total Only
"C" key to the
S-Mode position Power up machine while holding down the "CASH
TEND" key.
Printer & Display
Test
"C" key to the
S-Mode position
Enter 1 and press the "CASH TEND" key.
Keyboard Test
"C" key to the
S-Mode position Enter 2 and press the "CASH TEND" key. Exit
test mode by pressing the "CLEAR" key twice.
Keylock Test
"C" key to the
S-Mode position Enter 3 and press the "CASH TEND" key. Rotate
the "C" key to all keylock positions.
EPROM Check
Sum
"C" key to the
S-Mode position
Enter 4 and press the "CASH TEND" key.
S-Mode Programming
Setting the
Number of
Departments
"C" key to the
S-Mode position Enter the number of Departments (5, 10, or 15),
press the "X/TIME" key, and "CASH TEND" key.
Department Program Scan
Depress the CASH TEND key, then the first department key to be
read, and the last department key to be read.
EXIT
CASH TEND
OR
TAX 1
SHIFT
TAX 2
SHIFT
DEPT
1
DEPT
30
DEPTS.
16-30
ONLY
CASH TEND
DEPT
SHIFT
NOTE: DEPT SHIFT functions as “Stay Down” in P-mode only.