Getting started
6
2
After fully charging, disconnect the wireless charger pack from the charger.
To save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and easily accessible while charging.
Battery charging tips and precautions
•
Chargers are sold separately.
•
The charger can simultaneously charge the wireless charger pack and a mobile device
when both are connected, but charging may take longer.
•
While charging, the wireless charger pack may heat up. This is normal and should not
affect the wireless charger pack’s lifespan or performance. If the battery gets hotter than
usual, the charger may stop charging.
•
If the wireless charger pack is not charging properly, take the wireless charger pack and
the charger to a Samsung Service Center.
Checking the battery status
While the wireless charger pack is charging, the battery indicator will flash according to the
charging status.
Charging status
Battery indicator status
100%
Four indicator lights on
75–99%
Three indicator lights on and one indicator light blinking
50–75%
Two indicator lights on and one indicator light blinking
25–50%
One indicator lights on and one indicator light blinking
0–25%
One indicator light blinking
If the wireless charger pack is exposed to extremely hot or cold temperatures or
an error occurs, the four indicator lights will blink. Disconnect the charger from the
wireless charger pack, and then reconnect them.
44
English
44
English (USA)
4
