Using the device
4
4
English (USA)
•
The mobile device can be updated to the latest software.
•
You can charge the mobile device using the charger (sold separately).
•
When the mobile device is connected to the Multiport Adapter, the battery
consumption increases.
•
Charging the mobile device through the Multiport Adapter may take longer than
charging it directly.
•
To save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and easily accessible while charging.
•
The mobile device that supports USB Type-C, DP (HDMI) output, USB 3.0, Gigabit
Ethernet is compatible with this Multiport Adapter. Some features may not work
properly depending on the connected device.
•
Some features may not work properly if the charger is not connected while using
the Multiport Adapter.
Fast charging
The Multiport Adapter supports fast charging. To begin fast charging, connect a mobile
device that supports fast charging to the Multiport Adapter.
Use only Samsung-approved chargers that support fast charging (12 V/2.1 A).
Connecting to an Ethernet network
Use the LAN port on the Multiport Adapter to connect the mobile device to an Ethernet
network.
1
Connect a LAN cable to the LAN port on the Multiport Adapter.
2
Tap
Settings
→
Connections
→
More connection settings
→
Ethernet
→
Configure
Ethernet device
on the mobile device, and then set up the network connection. When
setup is complete, tap
Ethernet
to connect to the network.
