96
Images are too bright
Exposure is excessive
o
Reset exposure compensation
No image on external monitor
The external monitor has not been connected properly with
the camera
o
Check the connection cables
There are incorrect fi les in the memory card
o
Insert a memory card that has correct fi les
When using the PC’s explorer, the [Removable Disk] fi le does not show
Cable connection is incorrect
o
Check the connection
The camera is off
o
Turn the camera on
The operating system is not Windows 98SE, 2000, ME, XP, Vista / Mac
OS 10.0 - 10.4. Alternatively the PC does not support USB
o
Install Windows 98SE, 2000, ME, XP, Vista / Mac OS 10.0 - 10.4 to PC
that supports USB
The camera driver is not installed
o
Install a [USB Storage Driver]
x
x
x
x
x
x
x
The fl ash does not fi re
Flash off mode has been selected
o
Dis-engage fl ash off mode
The camera mode can’t use the fl ash
o
Refer to the FLASH instruction (p.30)
Incorrect date and time is displayed
The date and time have been set incorrectly or the camera has adopted
the default settings
o
Reset the date and time correctly
The camera buttons do not operate
Camera malfunction
o
Remove/re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
Incorrect memory card format
o
Re-format the memory card
The images don’t play back
Incorrect fi le name (Violation of DCF format)
o
Do not change the image fi le name
Colour of image is different to the original scene
White balance or effect setting is incorrect
o
Select appropriate White balance and effect
x
x
x
x
x
x
x
Before contacting a service centre
