12 _ Disassembly and Reassembly
Part
Figure
Description
Door inner
Preparation:
• Make sure to disconnect the power.
• Remove the lower basket in the
dishwasher.
• Cover the Assy sump with a towel to
prevent losing screws.
1. Open the door completely.
Remove the 14 screws holding the tub front,
frame front, and control panel in place.
Before removing the parts, place a
cushioned mat on the floor to prevent the
parts from being scratched.
After removing screws, make sure to hold
the tub front using your hand. It can prevent
closing door suddenly and harming you.
Caution
Do not place the removed screws on the
tub front. They may fall into the sump assy.
※
Reassembly is in the reverse order of the removal.
2.
Remove the cover fan by rotating it
counterclockwise.
Control Panel
3.
Remove the four
wire
connectors.
1. Remove the Assy control panel from Door
outer. (Pull out just a little.)
2. Remove the black foam block.
4.
Remove the door
inner.