Installation
Installation
English
20
FBI (Fully Built-In) models
A
1.
Insert the supplied
rubber skirt (A)
into
the 3 holes at the bottom of the door.
(applicable models only)
Ø2
10~12
2.
Put the installation template on the
back of the custom panel and fix it
temporarily using transparent tape.
Note that the rear of the custom panel
will be attached to the dishwasher door.
CAUTION
• The top end of the custom panel must
be aligned with the top end of the
installation template.
• Use a custom panel between 4 kg and
9 kg.
3.
Mark 6 points guided on the installation
template.
B
C
B
C
4.
Remove the installation template and
tighten the
custom panel fixers (B)
at
the top with
2 screws (C, Ø4 X 16)
as
shown.
DW9000M_DD68-00193B-02_EN.indd 20
2018-04-10 12:58:55