Before you start
English
23
Salt storage
CAUTION
• Use dishwasher-specific salt only. Do not use any other type of salt or solvent. This
may damage the salt storage and the water softening system.
• To prevent corrosion due to an excessive amount of salt or salty water, always fill the
salt storage immediately before a washing cycle gets started.
1.
Open the door.
2.
Turn the cap counter clockwise to open.
3.
Fill the salt storage with water (only
required when using the dishwasher for
the first time).
4.
Apply dishwasher salt.
CAUTION
• The maximum capacity is about 1 kg.
Do not exceed the capacity.
• Exceeding the capacity may affect the
dishwasher performance.
5.
Turn the cap clockwise to close.
NOTE
• To clean salt or salt water from
dishwasher, run the Quick cycle.
• Depending on the size of the salt grains,
it may take a while for the salt to
dissolve and the indicator (
) to turn
off.
Salt indicator
The indicator (
) turns on if there is not enough salt for the next several cycles.
DW9000M_DD68-00191D-01_EN.indd 23
2/20/2018 12:26:12 PM
