Standard Disassembly Drawings _ 19
Part
Figure
Description
DOOR HINGE /
GUIDE HINGE
(DW6*R70**BB)
B
A
[DISASSEMBLY]
1. Remove 8 screws that connect the
ASSY
CONTROL PANEL
to the dishwasher’s DOOR with
Torx® T15 screwdriver.
- Type A: DD81-02756A / 2 pcs
- Type B: DD81-02758A / 6 pcs
Warning
Be sure to remove the power plug before servicing.
Caution
The screws can fall into the
SUMP
after
disassembly. Keep the screws to other place to
reassemble the DOOR.
2. Remove wire connector that connect
MAIN PBA
to
TOUCH PBA
.
C
3. Remove 6 screws to take off
DOOR OUTER
.
NOTE
:
Screws on DOOR are Torx® T15 type. Use the
Torx® T15 screw driver when release the screws.
- Type C: DD81-02757A / 6 pcs
Caution
The screws can fall into the
SUMP
after
disassembly. Keep the screws to other place to
reassemble the DOOR.
Hook
Hook
4. Remove 2 terminals that connected to
DETERGENT DISPENSER
, and 1 ground wire that
connected to
BRACKET DOOR FRAME
.
Warning
Be sure to remove the power plug before
servicing.
Caution
Pay attention to hook of terminals.
