Using the detergent and water softener
_19
02
USING THE DETERGENT AND W
A
TER SOFTENER
SETTING MODE
You can change the sound, auto door open function, rinse aid level, and water hardness setting to your
preference.
Entering the Setting mode
1.
Turn the dishwasher on.
2.
Press and hold the
Program
button for fi ve seconds within 60 seconds from turning on the
dishwasher.
When you entered the Setting mode, the display will show
-
“0:00” (DW60M6043F* / DW60M5043F*)
-
Current water hardness setting (DW60M5042F*)
• Default setting : H3
Water hardness level setting
You can change the water hardness level according to water hardness in your local area.
Changing this setting will have effect on the salt consumption in the dishwasher’s salt storage.
DW60M6043F* / DW60M5043F*
1.
Press the
Hygiene
button to select the water hardness level setting menu.
-
The display will show the current setting.
• Default setting: “H3”
2.
Press the
Program
button to change the setting.
-
You can select from H1 – H6 (soft – hard).
3.
Wait 5 seconds to save the setting.
DW60M5042F*
1.
The display will show the current setting.
-
Default setting: “H3”
2.
Press the
Program
button to change the setting.
-
You can select from H1 – H6 (soft – hard).
3.
Wait 5 seconds to save the setting.
• Change the setting according to the table in the
“Water softener”
section on page
13
.
• The dishwasher regenerates the water softener once every 3-4 cycles depending on the
setting.
However, the dishwasher will regenerate the water softener on the first cycle after you
change the setting.
DW5500MM_DD81-02437S-01_EN.indd 19
DW5500MM_DD81-02437S-01_EN.indd 19
2021-07-27 4:22:55
2021-07-27 4:22:55
