Disassembly and Reassembly _ 3
1. TOOLS FOR REMOVAL AND REASSEMBLY
Tool image
No.
Tool
Type
Remarks
①
Adjustable Wrench
②
Open-end Wrench
1-7/16”
③
Vice Pliers
④
Others
(screwdriver, nipper, long nose pliers)
Common tools for servicing
Screwdriver – Phillip, Flat, Torx T15
⑤
Ear clamping tool
In reassembling of the clamp-bend(ear clamp) using our
SVC part, this tool is needed.
NOTE
:
Preparation for parts replacement
1. Remove the residual water inside the product. (Drain the water by operating the drain pump)
2. Close the water supply valve.
3. Turn off the power & disconnect the power cable.
You must turn off the circuit breaker connected to the product.
4. Pull out the unit from the sink and lay it on the floor.
Be careful of the drain hose when pulling out the unit.