English
18
Ins
tallation
Installation
Step-by-step installation
The installation procedure may differ depending on the model.
STEP 1
Select a location
A
B
Select a location that meets the following
conditions.
• The location must have a solid floor that
can support the weight of the dishwasher.
• The location must be near a sink with easy
access to the water supply, drain system,
and electrical outlet.
• The location must let you load dishes into
the dishwasher easily.
• The location must have sufficient space
for the dishwasher door to open easily
and provide enough space between the
dishwasher and the cabinet sides.
• The rear wall must be free of obstructions.
Installation in a new location
If you install the dishwasher in a new
location, follow these instructions before
installing the dishwasher.
1.
Using a hole saw, cut a hole into the side
of the cabinet that holds the sink
(A)
.
2.
If the base inside the sink cabinet is raised
above the kitchen floor and is higher than
the connections on the dishwasher, make a
hole in the base inside the cabinet and in
the cabinet side
(B)
.
NOTE
• If you are replacing an old dishwasher, check the existing connections for compatibility
with the new dishwasher and replace the connections as needed.
• You may need to cut a hole in the opposite side of the cabinet according to the location
of the electrical outlet.
DW8500AM_DW60A8070BB_ET_DD81-03206A-01_DE+IT+FR+NL+EN.indb 18
DW8500AM_DW60A8070BB_ET_DD81-03206A-01_DE+IT+FR+NL+EN.indb 18
2021-03-24 �� 1:14:16
2021-03-24 �� 1:14:16