English
16
Ins
tallation
Installation
STEP 2
Check the water line
• The water line pressure must be between 0.05 and 0.8 MPa.
• Make sure that the water temperature does not exceed 60 °C. Hot water over 60 °C may
cause the dishwasher to malfunction.
• Make sure that the water supply valve is turned off before connecting the water supply
line to the dishwasher.
STEP 3
Arrange the hoses
Pull the power plug, the water hose, and
the drain hose through the sink hole.
CAUTION
• Use caution not to kink or step on the
power plug or the hoses.
• Do not remove the brown paper on the
back of the dishwasher. The paper is
used to keep the rear side clean against
the wall.
STEP 4
Level the dishwasher
You can adjust the height of the dishwasher up to 45 mm using the levelling legs.
0-45 mm
1.
While slightly lifting the front or rear
(or both in turns) of the dishwasher, turn
the levelling legs to adjust the height.
2.
When complete, use the leveler to make
sure the dishwasher is level.
3.
Insert the dishwasher under the sink
and make sure to secure at least
4 mm space between the top of the
dishwasher and the bottom of the sink
plate.
CAUTION
Do not arrange the power cable of the dishwasher using a metallic cable tie.
DW60BG750FSL_SA_DD68-00250K-00_EN.indd 16
DW60BG750FSL_SA_DD68-00250K-00_EN.indd 16
2022-12-27 오후 5:17:27
2022-12-27 오후 5:17:27