English
32
Be
for
e y
ou s
tar
t
Before you start
Rinse aid level setting
You can change the amount of rinse aid applied during a cycle.
1.
Press the
Rinse Add
button to select the rinse aid level setting menu.
- The display shows the current setting. (Default setting: “d4”)
2.
Press the
Program
button to change the setting.
- You can select from d1 - d5 (minimum – maximum).
3.
Wait 5 seconds to save the setting.
Water hardness level setting
You can change the water hardness level according to water hardness in your local area.
Changing this setting will have effect on the salt consumption in the dishwasher’s salt
storage.
1.
Press the
Delay Start
button to select the water hardness level setting menu.
- The display shows the current setting. (Default setting: “H3”)
2.
Press the
Program
button to change the setting.
- You can select from H1 – H6 (soft – hard).
3.
Wait 5 seconds to save the setting.
NOTE
• Change the setting according to the table in the “
” section on
.
• The manufactory setting: H3 (EN50242)
• The dishwasher regenerates the water softener once every 3–4 cycles depending on the
setting. However, the dishwasher will regenerate the water softener on the first cycle
after you change the setting.
DW4000RM_DD81-03019B-00_EN.indd 32
9/4/2020 11:22:40 AM
Содержание DW50R4040F Series
Страница 54: ...Memo DW4000RM_DD81 03019B 00_EN indd 54 9 4 2020 11 22 45 AM ...
Страница 55: ...Memo DW4000RM_DD81 03019B 00_EN indd 55 9 4 2020 11 22 45 AM ...
Страница 110: ...Notatka DW4000RM_DD81 03019B 00_PL indd 54 9 4 2020 11 51 34 AM ...
Страница 111: ...Notatka DW4000RM_DD81 03019B 00_PL indd 55 9 4 2020 11 51 34 AM ...