Installation requirements
Installation requirements
English
16
WARNING
Risk of Electric Shock
When local codes allow, you can connect
the dryer’s electrical supply with a new
power supply cord kit, marked for use with
a dryer, that is U.L. listed and rated at a
minimum of 120 / 240 volts, 30-amperes
with three No. 10 copper wire conductors
terminated with closed loop terminals,
open-end spade lugs with turned up ends,
or with tinned leads.
• Do not reuse a power supply cord from
an old dryer. The power cord electric
supply wiring must be supported at the
dryer cabinet by a suitable UL-listed
strain relief.
• Grounding through the neutral
conductor is prohibited for (1) new
branch-circuit installations, (2) mobile
homes, (3) recreational vehicles, and
(4) areas where local codes prohibit
grounding through the neutral
conductor. (Use a 4-prong plug for a
4 wire receptacle, NEMA type 14-30R.)
Electric models – Canada Only
• A 120 / 240 volt, 60 Hz AC approved
electrical service fused through a
30-ampere fuse or circuit breaker on
both sides of the line is required.
• All Canadian models are shipped
with the power cord attached. The
power cord should be plugged into a
30-ampere receptacle.
NOTE
In Canada, you may not convert a dryer to
208 volts.
DV7450M-03170Z-00_EN.indd 16
2017-01-25 11:24:18
Содержание DVE50M7450W Series
Страница 1: ...Dryer User manual DVE G 50M7450 DV7450M 03170Z 00_EN indd 1 2017 01 25 11 24 16 ...
Страница 53: ...Memo DV7450M 03170Z 00_EN indd 53 2017 01 25 11 24 28 ...
Страница 55: ...Secadora Manual del usuario DVE G 50M7450 DV7450M 03170Z 00_MES indd 1 2017 01 25 11 27 18 ...
Страница 107: ...Notas DV7450M 03170Z 00_MES indd 53 2017 01 25 11 27 29 ...