Samsung DVD-VR320/XEF, Руководство пользователя

Страница: 171 / 249

Operating Instructions
13-46 Samsung Electronics
English
- 57
R
ecording
Concerning Copy Control Signals
TV broadcasts that contain copy control signals may have
one of the following three signal types, Copy-Free, Copy-
Once and Copy-Never. If you want to record a copy-once
type programme, use DVD-RW with CPRM in VR Mode and
DVD-RAM.
Once
Copy Once
has been recorded, additional record-
ing cannot be performed.
This * marked parts are compatible with CPRM.
- Content Protection for Recordable Media (CPRM)
CPRM is a mechanism that ties a recording to the
media on which it is recorded. It is supported by some
DVD recorders, but not by many DVD players. Each
blank recordable DVD has a unique 64-bit media ID
etched in the BCA. When protected content is record-
ed onto the disc, it can be encrypted with a 56-bit C2
(Cryptomeria) cipher derived from the media ID.
During playback, the ID is read from the BCA and
used to generate a key to decrypt the contents of the
disc.
If the contents of the disc are copied to other media,
the ID will be absent or wrong and the data will not be
decryptable.
Recording the current
channel you are watching
1. Check the antenna cable is connected.
2. Check the remaining time on the disc.
DVD-RAM/DVD-RW discs should be formatted in
advance before beginning recording. Most new discs
are sold unformatted. Make sure to format your unfor-
matted discs before recording.
1
Press the
OPEN/CLOSE
button and place a recordable
disc on the disc tray.
2
Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel display.
3 Press the PROG/TRK ( / ) buttons or number
buttons to select the channel you want to record.
4
Press the
REC SPEED
button repeatedly, to select the
recording speed (quality).
• XP(High, approx. 1 hour)
➝
SP(Standard,
approx. 2 hours)
➝
LP(Low, approx. 4 hours)
➝
EP(Extended Play, approx. 6hours/8hours)
5
Press the
REC
button.
• “ ” is displayed on the screen and recording
begins.
6 Press the
STOP
button to stop or finish a recording
in progress.
• The message “Updating the information of disc.
Please wait for a moment” is displayed.
Pausing / Resuming
• Press the
REC PAUSE
button to pause a recording
in progress.
• Press the
REC PAUSE
button again during pause to
resume recording.
• You can switch channels by pressing the
PROG/TRK ( / ) buttons while recording
pauses.
■
You can not change the recording mode and
the channel while recording.
■
Recording will stop automatically if there is
no free space left for recording.
■
Up to 99 titles can be recorded onto a disc.
■
If the power interrupted due to power failure
or other reasons, the title being recorded will
not be saved onto the disc.
■
Recording will stop automatically if a copy
protected image is selected.
■
Do not use DVD-R authoring discs with this
unit.
Note
Copy-Free Copy-Once Copy-Never
DVD-RW(Ver.1.1) O - -
DVD-RW(Ver.1.1)
with CPRM
VR mode
O O* -
Video mode O -
DVD-R O - -
DVD-RAM(Ver.2.0) O O* -
-RW VR XP
CH 60
XP Recordable Time 02:08