
19
GB
☛
You do not need to preset the stations manually if you
have already set them automatically.
1
After pressing the MENU, press the OK or
❿
.
Result:
The Setup menu is displayed.
2
Press the corresponding
,
❷
buttons to select the
I n s t a l l
option.
3
Press the OK or
❿
to select this option.
Result:
The
Install
menu is displayed.
4
Press the corresponding
or
❷
buttons, until the
Manual
Setup
option is selected.
5
Press the OK or
❿
to select a
Manual Setup
option.
Result:
The
TV STATION TABLE
menu is displayed.
6
Press the
or
❷
buttons to select a programme number as
required.
7
Press the
❿
button to preset the station.
Result:
The
MANUAL TUNING
menu is displayed.
8
Press the
➛
or
❿
buttons to start scanning channel.
Result:
The frequency band is scanned and the first station
found is displayed.
9
If you...
Then...
Wish to store the
◆
Press the
or
❷
buttons until the
MFT
station displayed
is selected.
◆
Press the
➛
or
❿
buttons to adjust the
picture, if necessary.
◆
Press OK to store the station
Do not wish to
◆
Press the
or
❷
buttons until the
CH
store the station
is selected.
displayed
◆
Press the
➛
or
❿
buttons to go on
scanning the frequency band and display
the next station
◆
Go back to the beginning of Step
9
10
Repeat this procedure from Step
6
onwards, until all the required
stations have been stored.
11
On completion, press the RETURN button three times to exit the
menu.
Presetting the Stations Manually
User Set
Auto Power Off : Off
Screen Messages : On
Install
MANUAL TUNING
PR :
CH : - - -
MFT : -
MEMORY : OK
RETURN
TV STATION TABLE
PR CH
1
2
3
4
5
SWAPPING : OK
DELETE : CLEAR
RETURN
Auto Setup
Manual Setup
Install
TV System : G
VCR Output CH : CH 36
VCR
00208F DVD-V90K/BPT-GB2 11/20/03 3:49 PM Page 19