24
25
GB
GB
Selecting the Colour Mode
Before recording or playing back a cassette, you can select the
required system standard.
➢
◆
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1
After pressing the MENU, press the OK or
❿
.
Result:
The Setup menu is displayed.
2
Press the corresponding
,
❷
buttons to select the
User Set
option.
3
Press the OK or
❿
to select this option.
Result:
The
User Set
menu is displayed.
4
Press the corresponding
or
❷
buttons, until the
Colour
System
option is selected.
5
Press the Ok or
❿
button to select
Auto
➝
PAL
➝
MESECAM
➝
B/W
.
B/W
Black and White
6
On completion, press RETURN three time to exit the menu.
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Colour System : Auto
NICAM : On
IPC : On
User Set
Auto
PAL
MESECAM
B/W
VCR
Setting the DVD-VCR Output Channel
Selecting the RF OUT Sound Mode (B/G-D/K)
VCR
VCR
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1
After pressing the MENU, press the OK or
❿
.
Result:
The Setup menu is displayed.
2
Press the corresponding
,
❷
buttons to select the
Install
option.
3
Press the OK or
❿
to select this option.
Result:
The
Install
menu is displayed.
4
Press the
or
❷
buttons, until the
VCR Output CH
option is
selected.
5
Select the required output channel (CH21~CH69) by pressing the
OK or
❿
buttons.
CH21 . . CH36 . . CH69
6
On completion, press RETURN to exit the menu.
Then tune your television again (see page 15).
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
Install
TV System : G
VCR Output CH : CH 36
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
1
After pressing the MENU, press the OK or
❿
.
Result:
The Setup menu is displayed.
2
Press the corresponding
,
❷
buttons to select the
Install
option.
3
Press the ENTER button to select this option.
Result:
The
Install
menu is displayed.
4
Press the
or
❷
buttons, until the
TV System
option is
selected.
5
Press the
➛
or
❿
button to select G or K.
6
On completion, press RETURN to exit the menu.
G
K
Auto Setup
Manual Setup
TV System : G
VCR Output CH : CH 36
Install
CH:21
:
CH:36
:
CH:69
NICAM
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 40.
1
After pressing the MENU, press the OK or
❿
.
Result:
The Setup menu is displayed.
2
Press the corresponding
,
❷
buttons to select the
User Set
option.
3
Press the OK or
❿
to select this option.
Result:
The
User Set
menu is displayed.
4
Press the corresponding
or
❷
buttons, until the
NICAM
option
is selected.
5
To...
Press OK or
❿
, until...
Mono mode
Off
is displayed.
Off: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
NICAM mode
On
is displayed.
On: Normally set at this position.
6
On completion, press RETURN three times to exit the menu.
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Colour System : Auto
NICAM : On
IPC : On
User Set
On
Off
VCR
