25
24
Intelligent Picture Control
Intelligent Picture Control ( Remote Control )
VCR
VCR
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
During playback, press the
菜单( M E N U )
button on the remote
control.
Result:
The Setup menu is displayed.
2
Press the
确定(OK)
or .
Result:
The Setup menu is displayed.
3
Press the corresponding
,
buttons to select the
User Set
option.
4
Press the
确定(OK)
or buttons to select this option.
Result:
The
User Set
menu is displayed.
5
Press the corresponding
or
buttons, until the
I P C
option is
selected.
6
Press the
确定( o k )
or
buttons to select the IPC (intelligent
picture
control) option.
➢
When intelligent picture control mode is
O N
, the sharpness
of the image is adjusted automatically.
7
To adjust the sharpness manually, press the
button to turn the
IPC mode
O F F
.
8
Press the
or buttons until the picture is displayed according to
your preferences.
➢
If you do not press a button within ten seconds, the
PICTURE
menu disappears automatically.
9
On completion, press the
返回(RETURN)
button again.
1
During playback, press the IPC button.
Result:
The
P I C T U R E
menu is displayed.
2
Press the
button to turn the IPC (Intelligent Picture Control)
option
O N
and
O F F
.
➢
When Intelligent Picture Control mode is
O N
, the sharpness
of the image is adjusted automatically.
3
To adjust the sharpness manually, select Intelligent Picture Control
mode
O F F
.
◆
The horizontal picture adjusting appears.
4
Press the
or
buttons until the picture is displayed according to
your preferences.
➢
If you do not press a button within ten seconds, the
P I C T U R E
menu disappears automatically.
5
On completion, press the IPC button again.
1
On
Off
NICAM
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 35.
1
After pressing the
菜单(MENU)
, press the
确定(OK)
or .
Result:
The Setup menu is displayed.
2
Press the corresponding
,
buttons to select the
User Set
option.
3
Press the
确定(OK)
or to select this option.
Result:
The
User Set
menu is displayed.
4
Press the corresponding
or
buttons, until the
N I C A M
option
s selected.
5
To...
Press
确定(OK)
or , until...
Mono mode
O f f
is displayed.
Off: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode
O n
is displayed.
On: Normally set at this position.
6
On completion, press
返回(RETURN)
three times to exit the menu.
On
Off
VCR
DVD-90K_CHN-GB2.q 2003.4.11 11:16 AM 页面24
