12_
connections
connections
2
Using the video signal cable(s), connect the
VIDEO,
,
COMPONENT OUT
terminals on the rear of the
DVD player to the
VIDEO, COMPONENT IN
terminal of
your TV as described on pages 9 to 11.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select
external input
in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 26-27)
- The position of terminals can vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
RED
WHITE
RED
WHITE
Audio Cable
1
Using the audio cables, connect the
AUDIO (red and
white) OUT
terminals of 5.1 CH (Front L-R) on the rear of
the DVD player to the
AUDIO (red and white) IN
termi-
nals of the Amplifier.
Connection to an FM Antenna
1
Connect the FM antenna supplied to the FM Antenna Jack.
2
Slowly move the antenna wire around until you find
a location where reception is good, then fasten it
to a wall or other rigid surface.
FM Antenna
(Included)
Connection to an Audio System (2 Channel Amplifier)
Note
- This unit does not receive AM broadcasts.
Содержание DVD-P192R
Страница 35: ...AK68 01764A 02 ...