37
NOTE
NOTE
•
How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• Manufactured under license from Dolby Laboratories.
”Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
CHANGING
SETUP MENU
Setting Up the Audio Options
1
1
With the unit in Stop mode, press the SETUP
button.
2
2
Use the UP/DOWN buttons to select Audio Options.
Then press the ENTER button.
3
3
Use the UP/DOWN buttons to select the desired item.
Then press the LEFT/RIGHT buttons.
Dolby Digital Out
1
. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2
. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
• Be sure to select the correct Digital Output or
no audio will be heard.
DTS
1
. Off : Doesn’t output digital signal.
2
. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
2X Scan Audio
1
. Off : Turns 2X audio off.
Though 2X Scan Audio is ON in the SETUP MENU,
no sound will be heard on discs which are recorded with
LPCM, DTS or MPEG-2 Audio.
2
. On : Turns 2X audio on.
MPEG-2 Digital Out
1
. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2
. Bitstream :
Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH).
Select Bitstream when using the Digital
Audio Output.
Dynamic Compression
1
. On : To select dynamic compression.
2
. Off : To select the standard range.
DVD-C5050 12/4/02 3:17 PM Page 37