background image

English  43

O

per
ations

Cycle guide

Always follow the care label when drying. If care label instructions are not available, use the 
following chart.

Bedspreads & 
Comforters

• 

Follow the care label instructions or dry using the BEDDING.

• 

Make sure the item is thoroughly dry before using or storing.

• 

May require repositioning to ensure even drying.

Blankets

• 

Use the NORMAL and dry only one blanket at a time for best 
tumbling action.

• 

Make sure the item is thoroughly dry before using or storing.

Curtains & Draperies

• 

Use the PERM PRESS and medium temperature to help 
minimize wrinkling.

• 

Dry these in small loads for best results and remove as soon 
as possible.

Cloth Diapers

• 

Use the NORMAL and the High temperature settings for soft, 
fluffy diapers.

Down–filled Items 
(jackets, sleeping 
bags, comforters, etc.)

• 

Use the NORMAL and medium temperature setting.

• 

Add a couple of dry towels to absorb moisture and shorten 
drying time.

Foam Rubber (rug 
backs, stuffed toys, 
shoulder pads, etc.)

• 

Do not dry on a heat setting. Use the AIR FLUFF

WARNING

Drying a rubber item with heat may damage it or create a fire 
hazard.

Pillows

• 

Use the NORMAL.

• 

Add a couple of dry towels and a pair of clean sneakers to 
help the tumbling action and to fluff the items.

• 

Do not dry kapok or foam pillows using a heated dryer cycle. 
You can dry these items in the dryer only if you use the AIR 
FLUFF.

Plastics (shower 
curtains, outdoor 
furniture covers, etc.)

• 

Use the AIR FLUFF or the TIME DRY and the Low or Extra Low 
temperature settings depending on the care label instructions.

WARNING

Do not dry in the dryer: Fiberglass items (curtains, draperies, etc.).

• Woolens, unless recommended on the label.
• Items spotted or soaked with vegetable or cooking oils.

DV8000J-03170M-01_EN-US_150122.indd   43

2015/1/23   16:30:04

Содержание DV52J8700E(G) series

































































Отзывы: