4
Continuous Run Mode
How to enter:
-
Press Mixed Load Bell +Dry Level(DV405, DV395, DV393) or Wrinkle Prevent + Time(DV231,
DV365) for 7 sec during Power On State (normal user mode).
-
Once in Continuous Run Mode, display “cc” for 1 sec and finished cycle count for 1 sec and the
remaining time for 1 sec in turns.
-
The previous cycle will restart during Continuous Run Mode until the mode is deactivated.
-
During Continuous Run Mode, press Mixed Load Bell +Dry Level(DV405,DV395, DV393) or
Wrinkle P Time(DV231, DV365) for 7 seconds to go back to normal user mode.
Data Display Mode (DV405,DV395, DV393 only)
How to Enter:
-
With Power On, press AdjustUp Key + AdjsutDown Key for 7 seconds until it sends out a
beeping sound .
-
If not pressed any keys for 5 minutes, it will be set back from Data Display Mode
-
If pressing AdjustUp Key in this mode, Display Mode will be incresed.
-
If pressing AdjustDown Key in this mode, Display Mode will be decresed.
Definition of Data Display Mode:
-
Display Mode 1 : Temperature data
-
Display Mode 2 : Average Touch Sensor data for 1 minute
-
Display Mode 3 : Average Temperature data for 1 minute
ALIGNMENT AND ADJUSTMENTS
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before
servicing, unless testing requires power.
Power On state
(Normal user mode)
Mixed Load Bell +Dry Level(DV405,DV395,DV393)
or Wrinkle P Time(DV231,DV365) 7 SEC
Continuous Run Mode
(Technical)DV405-02365H-02_EN.indd 4
2012-06-19 �� 1:25:53
