GB-19
DSB-A100F
GB
GB-18
D
I
G
I
T
A
L
S
A
T
E
L
L
I
T
E
R
E
C
E
I
V
E
R
DSB-A100F
1.3 Solarsat Setting
This menu is only for the Solarsat antenna.
When you press this menu, you will get this message,
“
This menu is only for the Solarsat antenna.
If you have one-press OK, otherwise-press EXIT
.”
You can set the value according to your location.
●
To set the Value of Date and Time, use the
PG+/PG-
keys
to change the value.
●
Use the
/
keys to change position.
●
Use the
/
keys to move each filed.
1.4 Auto Scanning
The sub menu “
Auto Scanning
” will enable download the
channels automatically from the preprogrammed satellites.
To download channels automatically:
You can select All/Off/Only Free option mode with the the
/
keys in each satellite, which can be displayed more by
the
PG+/PG-
keys .
Off :
No Scan
All :
Scan all the channels
Only Free :
Scan free channels
●
Press
OK
key.
Auto Scanning menu will be displayed.
All the channels in the list from the selected satellite will be
automatically downloaded.
After scanning you will see “
Your digital receiver found...
”.
Then, you should press
OK
key to store all channels into STB.
OPERATING THE RECEIVER
1.2.1 User Mode
●
Select Driving Mode:
You have an option to choose the positioner’s movement type:
Continuous, Step
or
Time
.
●
Position the antenna with north, south, east and west and
use the
/
/
/
key to drive motor.
key drives to west,
key drives to east,
key drives to north and
key drives
to south.
●
If you finished driving of motor, select “
Store current Position.
”
and press
OK
key, to reset new driving motor.
N
No
otte
e
:
The level indicated in the “Signal Status” is only for reference.
The signal quality may be adequate even though the level indicated is not maximum.
●
Go to Stored Position.
When the stored position is reached then screen displays “
Stop
”,
you can now continue with the further operations.
●
Select the Calculate Sat Positions to recalculate the satellite position and
OK
key.
1.2.2 Installer Mode
After checking the positioner’s state, installer should use this menu.
He should set the “
Disable Limits
” before using User mode.
●
Select the Drive Motor
West/East and use the
/
keys
to drive motor.
key drives to west and
key drives to east.
●
Select “
Enable Limit
”, in order to enable “
Set Limit
”.
●
Select “
Disable Limit
”, in order to disable “
Set Limit
”.
●
Select “
Reset Positioner
” and
OK
key to reset positioner.
OPERATING THE RECEIVER
