manualshive.com logo in svg

Samsung DS17BS, Руководство по обслуживанию

Поделиться
Скачать
Samsung DS17BS Скачать руководство пользователя страница 14

DS17BS*

3-1

3 Disassembly and Reassembly

This section of the service manual describes the disassembly and reassembly procedures for the
DS17BS* monitor.

WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling

these components.

3-1 Disassembly

Cautions : 1. Disconnect the monitor from the power source before disassembly.

2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.

3. R/Cover opening jig : BH81-00001A

1. Place monitor face down on cushioned table.

Remove rear cover from the monitor and
remove 5 screws from the mointor.
(CAUTION : Remove screw grip don’t on the
stand than fall the stand from the top side of
the foot)

2. Disconnect function cable and lift up the

stand. Remove 5 screws from the monitor.

3. Open the rear cover and disconnect power

cable from the shield.

4. Remove the cover front and remove 5 screws

from the shield.

5. Remove 4 screws from the shield paenl coners

and lift up the shield.

Содержание DS17BS



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды