12
RECALL DIAL TONE
Press the
NEW
button to disconnect your existing call, wait for dial tone and then
make a new call on the same line.
NOTE: If this button does not appear on your keyset, the
FLASH
button may be
programmed to recall dial tone.
SENDING A FLASH
While on an outside call, press the
FLASH
button to send a flash to the telephone
company. This is required for some custom calling features or CENTREX use.
NOTE: Flash is not available on an ISDN circuit.
BUSY LINE QUEUING WITH CALLBACK
If you receive a busy signal when you are selecting an outside line, this means that
the line or group of lines is busy.
•
Press the
CBK
button, if programmed, or dial
44
. You will hear confirmation
tone.
•
When the line becomes free, the system will call you back.
•
Lift the handset or press the
SEND
button to answer, wait for dial tone and dial
the telephone number or speed dial number again.
NOTES:
1.
A callback will be canceled if not answered within 30 seconds. If you have set
a callback, your
CBK
button will light.
2.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
button before dialing.
CANCELING CALLBACK
A callback will be canceled if not answered within 30 seconds. If you have set a
callback, your
CBK
button will light.
Your phone may have a maximum of five callbacks to lines and/or stations set at a
time. To cancel a callback:
•
Press the
CBK
button, if programmed, or dial
44
. You will hear confirmation
tone.
•
While you are listening to confirmation tone, press the
HOLD
button. This will
cancel the oldest set callback.
NOTE: If the hot keypad feature is turned off, you must first lift the handset or press
the
SPEAKER
button before dialing.
ds_phones.qxp 5/27/2009 3:55 PM Page 18
