Samsung DMR57 Series Скачать руководство пользователя страница 40

Страница: 40 / 106

4. Troubleshooting

4-2

4-2. Service Inspection Mode

- Press the Delay Start + Power keys at the same time for two seconds to enter Service Inspection Mode.

- “ALL” is displayed for the first three (3) seconds and then “t1” is displayed.

- You can change the mode by pressing the Normal key. Each time the Normal key is pressed, the mode changes in the order of t1 → t2 → t3 → t4 → t5 → t6 → t7 → t8.

- If you want to activate a mode while operating the dishwasher, the door must be closed (The Door switches are ON.)

- If an “oE”, “LE” or “tE1” error occur, make sure to enter Service Inspection Mode after resolving it.

- Service Inspection Mode is described in the following table.

Mode

Related parts

Symptoms

Note

Inlet Valve

Flow Meter

Low Level Sensor

If you press the Delay Start key, water is drained for 45 seconds and then the water supply starts.

If the pulse count is more than 660, change the mode.

Make sure to change the mode when the pulse count is more than 660 in t1 mode.

Circulation Motor

A nozzle does not inject

water.

1. Press the Delay Start key to start or stop the Circulation Motor.

2. If a low water level is detected, water is supplied again and the operation continues.

Circulation Motor

Heater

Thermistor

1. Press the Delay Start key to start or stop the heater and the circulation Motor.

2. If a low water level is sensed, water is supplied again and the operation continues.

3. The current temperature is shown on the display.

4. If the water temperature is more than 70ºC, the Heater does not operate.

Fan Motor

The Fan Motor does not

operate.

Press the Delay Start key to start or stop the Fan Motor.

Drain Pump

Low Level Sensor

1. Press the Delay Start key to start the 2 parts.

2. When draining is finished, “t5” is blinking on the Display LED.

Low Level Sensor

When the Micro Switch

is turned on/off, there is

no change on the display

or a symbol other than

On/OFF is displayed.

1. MICRO SWITCH On

→ The sensing state is displayed as ‘On’ on the 88 segment display.

2. MICRO SWITCH Off

→ The sensing state is displayed as ‘OFF’ on the 88 segment display.

Thermistor

There is no change in the

water temperature.

The current temperature is displayed.

Half Load Position of

Distributor Motor

Micro Switch

(DMR77 Model)

1. If you press the Delay Start key, the parts operate just once.

2. There is no stop function.

3. While the Distributor Motor is operating, its sensing state is displayed as On/OFF on the 88 segment display.

4. When the Distributor Motor stops, the sensing state (On/OFF) of the Micro Switch is displayed.

Caution

If it has the power problem, you must check the FUSE first.

This dishwasher has the FUSE upon the Base. Refer to the 4-10 page.

Содержание DMR57 Series











































































































Результаты поиска

Содержание DMR57 Series

Отзывы:

Похожие инструкции для DMR57 Series

Бренды по названию

Популярные бренды

Samsung DMR57 Series, Руководство по обслуживанию

Результаты поиска

Содержание DMR57 Series

Отзывы:

Похожие инструкции для DMR57 Series

Бренды по названию

Популярные бренды