Samsung DISHWASHER, Руководство по обслуживанию

Страница: 53 / 72

Troubleshooting_51
Error Type Error mode Checking method Corrective actions
Drain error
5E
(5E1 - 5E5)
1. Check whether there is any foreign material in the Drain
Hose, Drain Pump, drain hole inside sump.
- Remove the foreign material in the Drain Hose, Drain Pump, drain hole inside
sump.
2. Check the connections for the Drain Pump connector. - Reconnect the Drain Pump connector.
3. Check whether the Drain Pump coil is conductive.
(Remove the connector before measuring.)
$SSUR[ȍ“a
- Faulty: Replace the Drain Pump.
4. Check the operation of the Inverter PBA
4-1. Check the operating AC voltage of the Inverter PBA
CN5 connector.
׻
Normal: 110V ~ 120V (while operating)
- Faulty: Replace the Main PBA assy
4-2. Check the operating LED(red) of the inverter PBA.
׻ Normal: Fully turn-on (while operating)
- Faulty: Replace the Inverter PBA assy.
4-3. Check the operating voltage between #1 and #2 of
the Inverter PBA CN8 connector at LA in test mode.
׻ Normal:50V ~ 90V (while operating)
׻ How to do LA in test mode
- Push Booster left key+Booster right key+Power key at
the same time.
- Push the Linear Auto key
$OO/HG'LVSOD\ĺ9HUVLRQ'LVSOD\ĺ$WĺQ7ĺ/)W
ĺ//Fĺ//Gĺ/+Gĺ/ĺ/ĺ/ĺ/
ĺ/$ĺ/Eĺ9HUVLRQ'LVSOD\ĺUHSHDWHG
- Faulty: Replace the Inverter PBA assy.
- Normal: Check a connection between the Inverter PBA and the Drain Pump.
Key input
error
bE-2
bE-3
Check whether there is condensation on the PBA.
- CN103 of Display Control Module connector
- CON100 TOUCH Module connector
׻
Normal: No condensation
- Faulty : Remove any condensation and moisture.
- Normal : Replace the Control Panel assy.
(Display Control Module, Touch Module, Sub Wire)