19
D-Link DIR-640L User Manual
Section 3 - Configuration
Enable SSID:
IP Address:
802.11 Mode:
Enable Auto
Channel Scan
(2.4GHz):
2.4GHz Wireless
Channel:
2.4GHz Wireless
Channel Width:
Check to enable the Multi-SSID wireless function. If you
do not want to use SSID wireless, uncheck the box to
disable all the wireless functions.
Input the IP Address of the router. (The default is
192.169.0.1)
Select one of the following:
802.11g Only - Select if all of your wireless clients are
802.11g.
802.11n Only - Select only if all of your wireless clients
are 802.11n.
Mixed 802.11n and 802.11g - Select if you are using a
mix of 802.11n and 11g wireless clients.
This setting can be selected to allow the DIR-640L
to choose the channel with the least amount of
interference for the 2.4GHz band.
Indicates the channel setting for the DIR-640L on the
2.4GHz band. If you enable Auto Channel Scan, this
option will be greyed out.
Select the Channel Width for the 2.4GHz band:
Auto 20/40 - This is the default setting. Select if you are
using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless
clients.
40MHz - Select if using only 802.11n wireless clients.
Wireless Settings
The Wireless Settings feature will allow you to create temporary zones that can be used by guests to access the Internet.
