《
23
》
Flash ( )/ Left button
●
If you press the shutter button after selecting the Auto, Fill-in, Slow sychro
flash, the first flash fires to check the shooting condition (Flash range and
Power ratio of flash).
Do not move the camera until the second flash fires.
●
Using the flash frequently will reduce the life of the battery.
●
Under normal operating conditions the charging time for the flash is
normally within 5 seconds. If the battery is weak, the charging time will be
longer.
●
During the continuous shot, AEB, Motion capture mode and movie clip
mode, the flash function will not operate.
●
Take photographs within the flash range.
●
The image quality is not guaranteed if the subject is too close or highly
reflective.
●
When taking an image in poorly lit conditions with the flash, there may be a
white speck in the captured image. The speck is caused by the reflecting of
the flash light from the atmospheric dust. It is not camera malfuction.
INFORMATION
●
Flash range
(Unit : m)
■
When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to
the left tab.
■
When the menu is not displayed on the LCD monitor,
the LEFT button operates as the FLASH
( ) button.
●
Selecting the flash mode
1. Rotate the MODE DIAL to select a RECORDING mode with the exception of
Movie clip and Motion capture modes.
2. Press the Flash button until the desired flash mode indicator displays on the
LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
Normal
WIDE
TELE
WIDE
TELE
WIDE
TELE
0.8 - 3.0 0.8 - 2.5
0.2 - 0.8
0.5 - 0.8
0.2 - 3.0
0.5 - 2.5
Macro
Auto macro
ISO
AUTO
6
[Selecting the Auto flash]
