Samsung digimax 35, Руководство пользователя

Страница: 5 / 36

7
4. Battery
. If the camera is not being used for a long period of time please remove the batteries.
. This will extend the battery life and prevent damage from a battery leak or corrosion.
. Avoid using Manganese batteries. Only use the high density alkaline batteries.
. Do not mix old and new batteries.
. Low temperatures (below ) may reduce the output efficiency of the batteries, shortening the
operating time of the camera.
. When not in use, please turn the camera off to prevent overheating.
. Usage of the wrong batteries can cause damage to the camera. Please insert the batteries
correctly using, the +/- polarities.
. Keep the camera warm when using in low temperatures. The reduced efficiency of batteries
will usually recover in normal temperatures. When inserting the batteries, please make sure
that the camera is turned off.
. Please prepare the extra batteries for travel, ceremony and using the camera where external
temperature is very low.
※ Auto power off
Digimax 35 / MP3 has Auto Power Off function, and shuts down automatically
when not used for 2 minutes.
※ AC Adaptor
Please remove the AC Power Adapter from the camera when not in use for a long time.
The Digimax 35 / MP3 is not equipped with an Automatic Power Off function when used with
an AC power adapter.
22.. P Ph ho otto og grra ap ph hiin ng g
1) Memory card not recognized
An error message "ErC"will appear on the LCD status panel if a memory card
is inserted without being initialized.
To initialize the card, use "Del All" in mode functions.
Initializing the card allows data to be recorded.
2) Photographing does not operate
. Battery consumption.(� ) -> 새 Replace new battery or use adaptor.
. Card not inserted .( ) -> Insert card.
. Card recording full.( ) -> Insert new card.
. Card broken or different format of compact flash card.( ) -> Use compact
flash card supplied separately.(Other products might be different in format).
. Photographed object has a low brightness.( ) -> Select Auto Flash Mode.
3) The Flash will not fire.
The flash is off.The objects and background are too bright. -> Set to Automatic Flash mode.
4) What does mean the Hi and Lo.
Hi mode : This mode sets the image size by VGA (640x480).
Lo mode : This mode sets the image size by CIF (320x240).
Ⅱ Ⅱ . FA Q s
Downloaded From camera-usermanual.com