background image

123

Edit Channel

MENU

 

m

 

 

Broadcasting

 

 

Edit Channel

 

 

ENTER

 

E

Broadcasting

Edit Channel

 

-

The displayed image may differ depending on the model.

 

-

Available in 

TV

 mode only.

Manage channels saved on your TV. Delete channels, re-register deleted channels or rename analog channels.

Icons found in the edit channel page

 

A

: Analog channel

 

*

: A channel that is selected

Deleting/registering channels

Deleting channels

Select channels to delete from the screen. To cancel, select again. To select all channels, select 

Options

 from the screen 

and then select 

Select All

 from the sub-menu items.

 

Alternatively, press and hold the 

E

 button on the remote control for about three seconds to run 

Select All

 / 

Deselect 

All

.

After selecting channels, select 

Delete

 from the screen to delete the channels.

Re-registering deleted channels

Register deleted channels again, if required. Deleted channels are grayed out and can only be found in the list of all channels. 
The register function is enabled for deleted channels only.

Select 

Options

 from the screen. Sub-menu items are displayed. Select 

Category

 from the sub-menu items and then 

select 

All

.

From the list of all channels, select deleted channels you want to register again. To cancel, select again. To select all 

channels, select 

Options

 from the screen and then select 

Select All

 from the sub-menu items.

 

Alternatively, press and hold the 

E

 button on the remote control for about three seconds to run 

Select All

 / 

Deselect 

All

.

After selecting channels, select 

Add

 from the screen to re-register the channels.

Содержание DH40E














































































































































































































Отзывы: