SAMSUNG
System Administration and Special Features Guide
DCS-816
March 1999
3 - 10
selected
4. Dial the speed dial location (e.g.,
05
)
OR use
UP
or
DOWN
to scroll through the location
[205] SPEED NAME
01 : _
numbers and use the right soft key to move the cursor
OR press the left soft key to return to step 2
5. Enter the name using the procedure in
3.4
Program
Station Names
[205] SPEED NAME
01 : SAM SMITH
If you make an error, press
HOLD
to clear an entire entry
or use the
DOWN
key to step back one character
6. Press the
F
key to access
3.9 Program Personal
Speed Dial Numbers For Other Stations
OR press the left soft key to return to step 4
OR press the right soft key to return to step 2
OR press
TRSF
to store and exit programming
OR press
SPEAKER
to store and advance to the next
program
3.11 ASSIGN SPEED DIALLING BLOCKS
[MMC 606]
Your system can have up to 500 speed dial entries assigned (50 blocks of 10 numbers
each). Up to 200 of these (20 blocks) can be allocated as system speed dials, and the re-
mainder allocated to keysets as personal speed dials. Consequently, the more system
speed dials that are allocated, the fewer speed dials are available for personal use.
When assigning speed dials, this MMC displays the number of system or personal blocks
that are currently assigned and also shows the number remaining to be assigned, called
the ‘Free List’. This program also allows you to delete blocks of speed dial if required.
PROGRAM KEYS
UP & DOWN
Used to scroll through options.
KEYPAD
Used to enter selections.
SOFT KEYS
Move cursor left and right.
SPEAKER
Used to store data and advance to next program.
HOLD
Used to clear previous entry.
Open customer programming and follow the instructions below.
