30
Reattaching the Freezer Door
REATTACHING THE REFRIGERATOR DOORS
1) Reattach a phillips screw (
➀
) and two hex head
screws (
➁
) to the hinge completely.
2) Place the hole in the bottom of the door (
➃
)
over the hinge (
➂
).
3) Insert the upper hinge shaft (
➄
) into the hole (
➅
). After levelling between the hinge brackets (
➆
).
Reattach and close the latch (
➇
) along the arrow.
Connect the water tube (
➈
) and the wires (
➉
). Then, place the water tube(
➈
) on the hanger ( )
4) Put the connector ( ) in the guide ( ) of the
connector-cover and close it.
5) Put the front part of the upper hinge cover ( )
on the front part of the upper hinge ( ) and
reattach it from the front of the upper hinge
cover first.
6) Reattach a phillips screw to the hinge cover ( ).
Be sure to insert the water tube and push to the end.
NOTE
14
15
16
12
13
11
DA99-01225E(0.7) 2008.1.29 10:42 AM 페이지30 in
