manualshive.com logo in svg

Samsung CXJ1331AX, Руководство по обслуживанию, Страница: 26 / 100

Поделиться
Скачать
Samsung CXJ1331AX Скачать руководство пользователя страница 26

Alignment and Adjustments (TV)

4-8

Samsung Electronics

4-2-8  Center Convergence Adjustment

1. Before attempting convergence adjustments,

the receiver should be powered on for at least
20 minutes.

2. Input a crosshatch pattern from a color bar

generator.

3. Adjust the Brightness and Contrast controls

for a well defined pattern.  

4. Adjust the two tabs of the 4-pole magnets.

Change the angle between the tabs, and
superimpose red and blue vertical lines in the
center area of the picture screen.

5. Next, turn both tabs at the same time.  Keep

the angle constant, and superimpose red and
blue horizontal lines at the center of the
screen.

6. Adjust the two tabs of 6-pole magnets.

Superimpose the red/blue lines with the
green. Adjusting the angle affects the
horizontal lines.

7. Repeat adjustments 3, 4 and 5. Because the

4-pole and 6-pole magnets interact, the dot
movement is complex.

RED

BLUE

BLUE

RED

4-Pole Magnet Movement

GREEN

RED/BLUE

RED/BLUE

GREEN

6-Pole Magnet Movement

Fig.  4-7  Center Convergence Adjustment

Содержание CXJ1331AX





































































































Отзывы:

Нет отзывов