background image

English - 6

Picture - 
Mode / Custom / 
Colour Tone / Size / 
Digital NR /  Tilt

Mode: Dynamic/
Standard/Movie/Custom

You can select the type of
picture which best
corresponds to your viewing
requirements.

You can select these
options simply by pressing the 

P.MODE

button on

the remote control.

Custom: Contrast/Brightness/Sharpness/
Colour/Tint

(NTSC only)

The television has several settings which allow you to
control the picture quality.

If you make any changes to these settings, the
picture mode is automatically switched to 

Custom

.

Colour Tone: Cool2/Cool1/Normal/Warm1/
Warm2

Size

You can select the picture size which best corresponds to
your viewing requirements. It is variable depending on
the model.

You can change the picture size simply by pressing
the 

P.SIZE

button on the remote control.

Digital NR

If the signal received by the television is weak, you can
activate this feature to reduce any static and ghosting
that may appear on the screen.

Tilt

(depending on the model)

If you find that the picture received is slightly tilted to one
side, you can adjust the tilt setting (-7 to +7).

Sound - 
Mode / Equalizer / 
Auto Volume / Dolby Virtual / 
Pseudo Stereo /  Turbo Plus

Mode: Standard/Music
/Movie/Speech/Custom

You can select the type of
special sound effect to be
used when watching a given
broadcast.

You can select these
options simply by pressing the 

S.MODE

button on

the remote control.

Equalizer

The television has several settings which allow you to
control the sound quality.

If you make any changes to these settings, the
sound mode is automatically switched to 

Custom

.

Auto Volume

Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.

Dolby Virtual

(depending on the model)

Pseudo Stereo

These features convert a monaural sound signal into two
identical left and right channels. Once the 

Dolby

Virtual

or 

Pseudo Stereo

is set to 

On

or 

Off

, these

settings apply to the sound effects such as 

Standard

,

Music

Movie

, and 

Speech

.

Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.

Turbo Plus

This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can
enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.

You can change the options simply by pressing the

TURBO

button on the remote control.

Move

Enter

Exit

Mode

: Custom

Equalizer

Auto Volume

: Off

Dolby Virtual

: Off

Pseudo Stereo

: Off

Turbo Plus

: Off

Sound

TV

Before contacting the Samsung after-sales service, perform
the following simple checks. If you cannot solve the problem
using the instructions below, note the model and serial
number of the television and contact your local dealer.

No sound or picture

Check that the mains lead has been connected to a
wall socket.

Check that you have pressed the “

I

” button (On/Off)

and the 

POWER

button.

Check the picture contrast and brightness settings.

Check the volume.

Normal picture but no sound

Check the volume.

Check whether the volume 

MUTE

button on the

remote control has been pressed.

No picture or black and white picture

Adjust the color settings.

Check that the broadcast system selected is correct.

Sound and picture interference

Try to identify the electrical appliance that is affecting
the television, then move it further away.

Plug the television into a different mains socket.

Blurred or snowy picture, distorted sound

Check the direction, location and connections of your
aerial.
This interference often occurs due to the use of an
indoor aerial.

Remote control malfunctions

Replace the remote control batteries.

Clean the upper edge of the remote control
(transmission window).

Check that the “+” and “-” ends of the batteries are
inserted correctly.

Check that the batteries are drained.

Troubleshooting

Move

Enter

Exit

Mode

: Dynamic

Custom

Colour Tone

: Normal

Size

: Normal

Digital NR

: Off

Tilt

: 0

Picture

TV

AA68-03853A-00Eng_E.asia  4/21/06  3:10 PM  Page 6

Содержание CW-29Z404N









Отзывы: