O
P E R AT I O N
31
1
Press the
CH
or
CH
button to tune to the channel
that will be labeled.
2
Press the
MENU
button to dis-
play the menu, then press the
▼
button to select “Channel”.
Press the
√
√
button.
3
Press the
▼
button to select
“Labeling”.
Press the
√
√
button to begin
labeling. The left-most field will
be highlighted.
(Each label has four fields.
See top paragraph.)
4
Press the
▲
or
▼
button to
select a letter, a number, “*”, or
a blank. (Pressing the
▲
button
results in this sequence:
A,B,...Z,*, blank,0,1,...9).
▼
Note: You cannot select
“Labeling” in the A/V mode.
5
Press the
√
√
button to switch to
the next field, which will be
highlighted. Select a second
letter or digit using the
▲
and
▼
buttons, as above. Repeat the
process to select the last two
digits.
Press the
MENU
button to set the label and clear the menus from
the screen.
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-
ber, “*”, or a blank. When the DISPLAY button is pressed, the channel label will appear
next to the channel number.
AA68-03173A_00(E)-CHAPTER 3 9/15/03 11:56 AM Page 31
