13
3
Use the
$
or
%
buttons to select 0.7V or 1.0V.
NOTE
: Some video cards use video singals higher
than 1.0V which causes the display to be very bright.
For those video cards should be selected 1.0V.
Sync. Input Type
Use this menu to set your monitor to the correct type of
synchronization. Select “Separate”if the computer is
sending a separate synchronization signal. Select “Sync.
On Green” if the computer expects the monitor to syn-
chronize with the green signal it sends. Refer to your
computer or video card user’s manual to determine the
correct setting.
1
With the menu off, push the MENU button. Push the
$
button or
%
button until the “Sync. Input Type”
screen is displayed.
2
Push the button. The sync input type selection
screen will appear.
3
Use the
▲
button or
▼
button to select “Separate”
or “Sync. On Green.”
Exit
Once you are finished making adjustments to a feature,
use this menu to turn off the menu.
1
Once you are finished making adjustments to a fea-
ture, push the MENU button.
2
Push the
$
button or
%
button until the “Exit”
screen is displayed.
3
Push the MENU button to turn off the menu.
Chapter Three:Adjusting Your Monitor
CS9839-E 10/8/98 10:52 AM Page 13
