Installation
NOTE
• Please follow national and local electrical codes. Additional
electrical connection components may be required.
CAUTION
• Always remember to connect the refrigerant pipes
before performing the electric connections.
When disconnecting the system, always disconnect
the electric cables before disconnecting the
refrigerant pipes.
• Always remember to connect the air conditioner to the
grounding system before performing the electric connections.
Use a crimp ring terminal at the end of each wire.
The indoor unit is powered through the outdoor unit by
means of a H05 RN-F connection cable (or a more power
model), with insulation in synthetic rubber and a jacket
in polychloroprene (neoprene), in accordance with the
requirements specified in the standard EN 60335-2-40.
1
Remove the screw on the electrical component box
and remove the cover plate.
2
Route the connection cord through the side of the
indoor unit and connect the cable to the terminals
refer to the figure below.
3
Route the other end of the cable to the outdoor unit
through the ceiling & the hole on the wall.
4
Reassemble the electrical component box cover,
carefully tightening the screw.
L
1(L) 2(N)
F1
F2
L
N
F2
N
F1
Communication
cable
Indoor Power
cable
Main power
cable
Cable clamp
Indoor Unit
Outdoor Unit
Cable
Tie
<600"11"
Содержание CNH 4DB Series
Страница 2: ...History Version Modification Date Remark 9H 9 H H9H8 0 8 9 1 S 4 1 2 T H 8 H 8 H9H9 1 1 1 1 U 6 00 11 ...
Страница 9: ...Contents Wind Free 4Way Cassette 98 Outdoor Units 01 1 2 1 2 1 6 A ...
Страница 73: ...3 3 C Cent enter erof Gr of Gra avity vity OutdoorUnits S 8 M T Ƹ ϩϑ ࡤ ࣈ ʀ ʪϑࣉ Ƹ ϩϑ ࡤ ࣈ ʀ ʪϑࣉ 9 S 89 M T ...
Страница 74: ...3 Centerof Gravity OutdoorUnits 8 S 8 8 M TE S 8 M T Ƹ ϩϑ ࡤ ࣈ ʀ ʪϑࣉ ...