background image

C

HAPTER

F

OUR

: S

PECIAL

F

EATURES

4

.12

S

P E C I A L

F

E AT U R E S

Using the V-Chip

The V-Chip feature automatically locks out programming that is deemed inappropriate for
children. The user must first enter a PIN (personal ID number) before any of the V-Chip
restrictions can be set up or changed. 

Note : When the V-chip feature is active, channel-auto program features do not function.

Setting Up Your Personal ID Number (PIN)

1

Press the 

MENU

button to

display the menu.

Press the 

CH 

button

three times to select the
“Function” menu. 

Press the 

VOL+ 

button.

2

Press the 

CH 

▼ 

button

three times to select  the
“V-chip” menu.

Press the 

VOL+ 

button.

3

After entering a valid PIN
number, the “V-chip”
screen will appear. 
Press the 

CH 

▼ 

button

three times and highlight
“Change pin.” 

4

While the “Change pin”
field is selected, press the

VOL + 

button. The Change

pin screen will appear.
Choose any 4-digits for
your PIN and enter them.  

As soon as the 4 digits are entered, the “Confirm new pin”
screen appears. Re-enter the same 4 digits. When the Confirm
screen disappears, your PIN has been memorized. 
Press the 

MENU 

button three times to exit. 

The “Enter pin” screen will appear. Enter your 4-digit PIN
number. Note: The default PIN number for a new TV set is

0-0-0-0.”

Note: If you forget the PIN,

press the remote-control keys in the
following sequence, which resets the
pin to 0-0-0-0:

POWER OFF 

➜ 

MUTE 

➜ 

➜ 

➜ 

POWER ON.

Содержание CM19033

















































Отзывы: