Samsung Electronics
(a) Do not operate or allow the oven to be
operated with the door open.
(b) Make the following safety checks on all
ovens to be serviced before activating
the magnetron or other microwave
source, and make repairs as
necessary:
(1) Interlock operation,
(2) proper door closing,
(3) seal and sealing surfaces (arcing,
wear, and other damage),
(4) damage to or loosening of hinges
and latches,
(5) evidence of dropping or abuse.
(c) Before turning on microwave power for
any service test or inspection within the
microwave generating compartments,
check the magnetron, wave guide or
transmission line, and cavity for proper
alignment, integrity, and connections.
(d) Any defective or misadjusted
components in the interlock, monitor,
door seal, and microwave generation
and transmission systems shall be
repaired, replaced, or adjusted by
procedures described in this manual
before the oven is released to the
owner.
(e) A microwave leakage check should be
performed on each oven prior to
release to the owner.
PRECAUTIONS TO BE OBSERVED BEFORE AND
DURING SERVICING TO AVOID POSSIBLE
EXPOSURE TO EXCESSIVE MICROWAVE ENERGY
Содержание CM1219
Страница 35: ...Samsung Electronics 33 8 P C B Circuit Diagrams and Parts List 8 1 P C B Circuit Diagram CM1219 ...
Страница 39: ...37 Samsung Electronics 9 Wiring Diagram Operating Sequence 9 1 Wiring Diagram CM1219 1229 ...
Страница 43: ...ELECTRONICS Samsung Electronics Co Ltd MAY 2000 Printed in Korea Code No DE68 01157A ...