EN
9
Using the Check button
Confirming the cooking time and Power Level in each Memory
Program
Reading each Memory Program’s Cycle Counter
1.
Clear all operations by pressing the
Stop/Cancel
(
)
button.
Press the
Check
button to enter Check mode.
2.
By using
Number
buttons, enter the Memory Program
number from 1 to 20.
•
For example, suppose you press
5
(
), for Memory
Program 5 which is
HI
power Level,
I Stage
cooking
with a time of 6 minutes and 30 seconds, 6:30.
•
First, 5 will be displayed, but will change to show the
Memory Program settings.
3.
After one second, the display will clear automatically.
If you want to check other Memory Programs, just enter
the Memory Program numbers.
4.
Press the
Stop/Cancel
(
)
botton to exit the Check mode.
1.
Clear all operations by pressing the
Stop/Cancel
(
)
button.
Press the
Check
button to enter Check mode.
2.
Press the
Start
(
+30s) button, and then press any
Number
button, from 1 to 20, and the number of cycles for
that particular Memory Program will be displayed. The
cycle count is displayed in units of 10.
•
For example, if Memory Program 5 has been used 100
times, the display will show “10”.
As the display uses units of 10, the cycle counts
are approximate. The cycle count displayed
increases every ten cycles.
For example, if the cycle count were 90-99, “9”
would be displayed, The “9” would change to
“10” on the 100th cycle. The cycle counter
function has a limit of 99,990 cycles. Once that
number is exceeded, the cycle counter will
automatically clear and start again from “0”.
3.
After one second, the display will clear automatically. If you
want to check the cycle count of other Memory Programs,
just enter the Memory Program numbers.
4.
Press the
Stop/Cancel
(
)
button to exit the Checking
mode.
jtXW]`hl|TWZZXWiluUGGwG`GGm SGqG_SGYWW^GGYa\^Gwt
