Samsung CLP-550 Скачать руководство пользователя страница 32

Страница: 32 / 130

This manual is provided for information purposes only. All information included herein is
subject to change without notice. Samsung Electronics is not responsible for any changes,
direct or indirect, arising from or related to use of this manual.

• CLP-550, CLP-550N and Samsung logo are trademarks of Samsung Electronics

Co., Ltd.

• Centronics is a trademark of Centronics Data Computer Corporation.

• IBM and IBM PC are trademarks of International Business Machines Corporation.

• Apple, AppleTalk, TrueType, Laser Writer and Macintosh are trademarks of Apple

Computer, Inc.

• Microsoft, Windows, Windows 9x, Window Me, Windows 2000, Windows NT 4.0

and Windows XP are registered trademarks of Microsoft Corporation.

• All other brand or product names are trademarks of their respective companies or

organizations.

Содержание CLP-550



































































































































Результаты поиска

Содержание CLP-550

Отзывы:

Samsung CLP-550, Руководство по установке, Страница: 32 / 130

Результаты поиска

Содержание CLP-550

Отзывы: